Flat Hex Nut
Flat Hex Nuts are used together with Thread Bars as parts of the High-Strength Thread Anchor Systems.
The Nuts are of high quality and precision manufacturing and are fully compatible with the thread bars of the corresponding diameter.
The Flat Hex Nut secures the plate by transferring the force from the thread bar to the supporting surface.
| Diam, mm | SW (mm) | L (mm) | D (mm) | Weight (kg) |
| 15 | 30 | 50 | 34,5 | 0,22 |
| 15 | 30 | 100 | 34,5 | 0,45 |
| 20 | 32 | 45 | 37 | 0,17 |
| 20 | 36 | 60 | 69 | 0,36 |
| 25 | 50 | 60 | 55 | 0,70 |
| 28 | 50 | 60 | 55 | 0,70 |
| 32 | 65 | 72 | 75 | 1,40 |
| 36 | 65 | 80 | 75 | 1,45 |
| 40 | 70 | 100 | 81 | 2,12 |
| 50 | 80 | 110 | 92 | 3,10 |
| 63,5 | 100 | 115 | 130,2 | 4,72 |
| 75 | 115 | 160 | 132,2 | 8,84 |
Flat Hex Nuts are used together with Thread Bars as parts of the High-Strength Thread Anchor Systems.
The Nuts are of high quality and precision manufacturing and are fully compatible with the thread bars of the corresponding diameter.
The Flat Hex Nut secures the plate by transferring the force from the thread bar to the supporting surface.
These systems are used in Post-Tensioning, Formwork, Geotechnical, Ground engineering, Mining, Tunnelling, Soil Nailing, Slope Protection, and Retaining Structures.
Depending on the project requirements, we supply Thread Bars and Accessories of different size:
Diameter: 15, 20, 25, 28, 32, 36, 40, 5,0 63.5, 75 mm.
Grade: 500/630; 670/800; 830/1030; 930/1080; 1080/1230 MPa.
Materials comply with G30.18, ASTM 615, ASTM A123/A153 and GB/T 19001-2016/ISO 9001:2015 standards.
Corrosion Protection:
Black or plain: Standard coating
Coating: galvanized(on request)
Coating: epoxy coating(on request)
