Products Catalogue
Ground Improvement Equipment
Anchor Systems for Earth Retention
Auger Boring Machines
Cone-Penetration Testing (CPT), Geomil Equipment
Drilling Tools and Wear Parts
Excavator Mounted Drilling Mast
Grouting, Jet Grouting and Mixing Units, STA Milano
MORATH Equipment
Pile Breaker
Pre-owned equipment
Side Grip Vibrohammers
Slurry Treatment Systems
Soil Investigation and Water-Well drilling
Spare Parts and Accessories
Sunward Foundation Drilling Rigs
Vibro Hammers for Pile and Sheet Driving
Featured Products
-
Sunward SWDM165 Rotary Drilling Rig
- Max. Torque: 165 kNm
- Max. Depth: 55 m
- Max. Drilling Diameter: 1500 mm
- Winch / Cylinder Crowd System
- CFA
-
Max. torque:165 kNm
-
Operating weight:47 t
-
Sinodrills T40-16 Anchor Bar
- Materials comply with G30.18, ASTM 615, and ASTM A123/A153 standards.
-
Size: T40-16
-
O.D.: 40 mm
-
I.D.: 16 mm
-
Ultimate Load: 660 kN
-
Yield Load: 525 kN
-
Weight: 7,1 kg/meter
-
Thread direction: Left hand / Right hand
-
T15 Grouting Pump Unit
-
Max. Grouting Pressure:90 bar
-
Max. Flow Rate:150 lit/min
-
-
Auger 1060 mm
Casing diameter 1180 mm Equipped with Flat or Rock Bullet teeth Single Cut and Double Cut design Kelly box size is 200 mm; 130 and 150 mm are also available Larger or non-standard diameter Rock Drilling Buckets, as well as longer lengths, are available upon request-
Casing diameter:1180 mm
-
Teeth type:Flat
-
-
Casing 880 mm
Double wall casings.- Outside diameter 880 mm
- Inside diameter 800 mm
- Forging Joint
Designed for use with drilling tools with a diameter of 780 mm. Standard length is 1, 2, 3 or 4 m. Casings of longer or non-standard lengths can be also supplied. Supply of single-wall casings is also possible.-
Wall thicknesses:12 + 8 mm
-
Casing Screws numbers:10
-
-
SP800 Pile Breaker for Round Piles
SP800 Pile Breaker is a system for cutting the top part of round concrete piles. A suitable crane or excavator is required.- Range of Pile diameter (mm): 500 - 2500 mm
- Productivity in 8 hours: 20 - 100 piles
- Supporting excavator: 20 - 46 t
-
Vertical Drain (PVD) Installation Machine
WD 28 - 43 Combined Force 711 kN (80 tons) Mandrel Speed Max. 100 m/min (328 ft/min) Recommended Excavator Working Weight 45 - 60 t -
Rock Bullet Teeth 38/30 mm
Round Shank Chisel 38/30 mm B47K17H - 17 x 25 mm B47K19H - 19 x 25 mm B47K22H - 22 x 24 mm B47K22H - 22 x 27 mm
Proud Member of ADSC IAFD and ADSC Western Canadian Chapter
Do you have any questions? Contact us!
Contacts
Vaughan, ON, Canada Kelowna, BC, Canada
Phone: +1 437 855 4031 Phone: +1 604 910 9713
E-mail: info@ankergeo.ca E-mail: vorobev@ankergeo.ca
Warehouse Address:
9650 Bottom Wood Lake Rd, Lake Country, BC, V4V 1S7
Company details
Anker Geo Canada Inc.
Corporation number: 1256121-2
